I don't mind telling you that 95% of my clients have chosen to used First Choice Home Inspectors when buying Kansas City Real Estate.
I have always found them to be thourough, investigative and correct in their inspections.
Now they are offering mold inspections as one of their services. Read below the effects of mold.
If you need help with your North Kansas City Real Estate needs, please call me.
Fran White, REALTOR®
816-682-3897
Reece and Nichols Residential First Choice is Now Offering Mold Inspections!
Chris McCullough at First Choice Property Evaluations, Inc. is now certified to perform Mold inspections. We have added this service to provide a complete package of home inspection services.
We now offer Whole House, Whole House with Licensed Engineer (PE), Certified Radon Testing, Termite Inspections, Mold Inspections, Thermal Camera Inspections, Foundation and Structural Inspections.
Asthma has increased 300 percent in children in the past ten years. Research by WHO, in Germany, finds prostate cancer, breast cancer, and other cancers increasing due to mold-related problems.
Mold is the number one health problem with one in every three persons affected by mold and one in ten with a severe problem related to mold. These can range from the common cold, tonsillitis, sinusitis, bronchitis, asthma, and pneumonia, to cancer.
Check your home's humidity levels; buy or borrow a hygrometer and watch the changes in R.H. that occur throughout a typical day in different rooms of the house and over the heating season. To inspect your home for mold growth, winter is the best time except for basements which should also be inspected in the summer. With a flashlight and some simple tools, go through the entire house, both inside and outside, searching for moisture damage and mold growth and their potential causes.
The Stachybotrus species of mold is dangerous; it will start growing in 80 percent humidity but, once established, can grow at 55 percent humidity. This mold can develop from the decay of building materials and is much harder to control. If more than ten square feet develop, it is advised that a professional clean it up. When you see a small speck of mold, that's only part of the problem - the remainder being inside the walls.
Some of the causes of mold include: brush and trees within 30 feet of the building; venting the clothes drier inside the home; furniture against outside walls; plants and aquariums; standing water, such as keeping cold water in the kitchen sink; hot tubs; using several gallons of water to wash floors. 'Sick Building Syndrome' is caused by moisture and mold growth. It migrates through foundations up from the soil.
A dehumidifier is not the final answer as it only does the air and not the walls. What is required is a combination of ventilation, circulation and heat. Carpenter ants and termites will smell moisture from miles away and they only attack damaged wood. Ventilation alone won't help a crawl space. In the summer the vents bring in warm, moist air.
Mold forms on the coldest space. The only way to deal with it is with heat. Wall heaters with fans are more efficient than baseboard heaters.
Pull furniture and store material away from exterior walls and off basement floors; leave closet doors ajar; leave bedroom doors open as much as possible; undercut doors; don't block or deflect warm air registers; open drapes, blinds, and curtains; set the furnace fan to run continuously. This will use more electricity but can be offset by installing a two-speed energy-efficient motor; don't cut off the heating supply or close off unused rooms.
Uninsulated or poorly insulated areas such as exterior corners or foundation walls, should be improved with additional insulation. Be sure to install an air-vapor barrier, usually polyethylene, on the room side of the insulation to prevent hidden condensation behind the insulation. Seal hidden opening into the attic, tighten the attic hatch, weather-strip and caulk around windows and doors, gasket electrical outlets, caulk baseboards and seal the top of foundations. Using an air conditioner on muggy summer days also helps take out the moisture.
Humidifiers, dehumidifiers, air-conditioning units and filtration systems can be a source of mold growth if they are not regularly cleaned.
Key areas to check for moisture sources leading to condensation inside the home are roof leaks (especially at chimneys and skylights); wall leaks (especially at window sills and doors); foundation leaks (especially where the ground slopes toward the foundation); and plumbing leaks (especially at toilet bases and under sink drains).
Check any fuel-burning equipment - furnaces, hot water heaters, boilers, fireplaces and wood stoves - to ensure that they are venting properly. A blocked chimney could mean that combustion products, including large amounts of water vapor, are spilling into your house. Along with that moisture come dangerous combustion gasses, such as carbon monoxide, which cause deaths every year. Have heating equipment and venting systems checked by a trained service person.
If your moisture remedial work includes extensive air sealing, be sure that all fuel-burning equipment has an adequate supply of combustion air. High efficiency furnaces, for example, have their own air supplies and exhaust fans but conventional equipment may rely on house air for combustion and on 'natural draft' to move combustion products up the chimney flue. If starved for air or overpowered by an exhaust fan somewhere else in the house, such equipment can spill combustion gasses indoors. Examples of this include stains near the vent of a gas water heater, smoke entering the room from a wood-burning fireplace or stove, and pilot lights being blown out.
Mold growth often occurs in out-of-the-way areas like closets, corners, walls behind furniture and unused rooms. Increasing air circulation to these areas warms the cold surfaces and lowers local humidity levels.
To solve moisture problems, cover any exposed earth in a crawl space or basement with heavy polyethylene; slope soil away from foundations to keep basement walls and slab dry; patch foundation leaks; don't use humidifiers; avoid drying firewood indoors; operate bathroom exhaust fans during a shower; use your range hood exhaust when cooking; and, avoid steam-cleaning carpets in winter.
Molds are parasitic micro-organisms that appear as black, white or multi-colored stain or fuzz. In addition to causing asthma, they can cause other allergies and serious health problems. There are tens of thousand of varieties of molds and are difficult and expensive to identify, even for experts. Health officials recommend eliminating all molds from inside your home.
Most mold spores need condensation or damp materials to germinate and once are established, many colonies generate their own moisture and can continue to survive even under dry conditions. They also need mild temperatures and a source of food, such as house dust or drywall paper.
First Choice Property Evaluations, Inc.
705-B SE Melody Ln. # 199 Lees Summit, MO 64063
Phone: (816)-554-1199 Email: support@firstchoicekc.com
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.JPG)
